fereev.blogg.se - october 2022

How to download sas windowing environment

HOW TO DOWNLOAD SAS WINDOWING ENVIRONMENT HOW TO
HOW TO DOWNLOAD SAS WINDOWING ENVIRONMENT UPDATE
HOW TO DOWNLOAD SAS WINDOWING ENVIRONMENT CODE

Then manually copy all files from Modules, ConfigPages, and ROM folders into your new Lod folder. When the backup is created, open the backup folder in any file manager, and manually create inside a new folder named Lod. To do that follow Tests->Service information->HDD resources backup. First of all, you need to do the FW backup of a good working SAS HDD.

HOW TO DOWNLOAD SAS WINDOWING ENVIRONMENT HOW TO

Let’s see how to create a microcode based on a drive backup.

From other similar drives/backups in profile folders.

HOW TO DOWNLOAD SAS WINDOWING ENVIRONMENT UPDATE

From the PC-3000 Database, stored at the ACE Lab Personal Update box.

If you want to change FW on other drives of the same model, then this should only be done after a thorough check of the operation of the first drive, when you are confident that everything works and the first drive is fully functional. This is fixed by either turning the power off/on with the repeated “Download microcode” or turning off/on the power and simply refreshing the ID. In some variants of the combination, the FW model of the disk in the HGST HDD may display an incorrect model or capacity after “Download microcode”. Check the read/write operation or perform the “ Data integrity test” in the Universal Utility on a small surface area to make sure FW is working. Reread ID, then make sure that the data is correct. After downloading, the ID data will automatically change.Īfter that, turn off the power. The writing procedure lasts from 2-3 seconds to 20 seconds. Press OK at the next warning window as well.

So, we see our current model in the original model line and press OK. Important note! If you do not see your current HDD model in the ORIGINAL MODEL line, this microcode is not compatible with your current drive. Since our drive is 600Gb, the new vendor ID will be EGO600FBVFP after the microcode writing. New vendor ID depends on the current HDD capacity. VENDOR MODEL – the name of the vendor model TARGET SYSTEM – for which system FW is intended PRODUCTID is the factory name of the manufacturer’s family ORIGINAL MODEL – the name of the manufacturer’s model MANUFACTURER – HDD manufacturer, currently HGST Note the additional information in the log: It works for most cases, when the “ORIGINAL MODEL” and “VENDOR MODEL” fields match, as well as “MANUFACTURER” and “VENDOR” fields. If the checkbox is not set, then the FW writing will be in standard mode, which allows you to download the only FW intended for a particular model. The selected checkbox in the “ Unlock firmware” field means that FW will be written in a special mode, which allows FW to load another vendor. In a list of available resources we need to press the right mouse button on the one we would like to write and select the Info menu: Go to Tests->Service information->Work with ROM->Download microcode menu:Īnd select “ From DB folder” because this time we want to use resources stored in the PC-3000 SAS Database.

And only when you are sure that it is operable, perform the operation on the other drives. Then perform a thorough check of its operability. If you want to write FW on several identical disks, then you need to do this on one of them. And there are quite a few! Therefore, the user should conduct all actions at his own risk. Download Microcode cannot be checked on all variants of HDD models, FW versions, and vendors.

It should be noted that Download Microcode (FW writing) is a potentially dangerous operation, which can lead to HDD’s interoperability and all the complexities of restoring it back to the working condition.

HOW TO DOWNLOAD SAS WINDOWING ENVIRONMENT CODE

Download microcode (write FW) must be done for workable HDDs only because a part of the code is written on the surface and the writing errors can lead to the inoperability of the HDD.

Let’s see how to deal with that!įirst, we have an HGST drive SE_HGST/DKR5D-J600SS, model HUC109060CSS600 that we would like to change Vendor ID of. This issue can be solved ( for supported SAS drives) by changing the vendor ID with the PC-3000 SAS, starting from ver. These server systems are configured to work with particular special drives, and if any SAS drive gets damaged, the NAS system will not work with another HDD. As we know, SAS drives are mostly used in special NAS systems.